ESCUDO de LINK – The LEGEND of ZELDA | Te Digo Cómo

ESCUDO de LINK – The LEGEND of ZELDA | Te Digo Cómo

Articles Blog


Today TDCSH we’ll teach you to do one of the shields The Legend of Zelda Breath of the Wild but a moment before starting we tell you that we have opened a post office where you can send your letters or whatever you want with things we receive will a series of videos showing everything you order us, and now I go with Zelda shield Breath of the Wild To make our shield is needed to download the templates we have prepared for you this can do it from the link we have left in the description or entering our website www.tedigocomosehace.com where you have available for download all necessary templates for this or any of the projects that you can see in the videos from this channel once the cut will stick templates corresponding to the part the front shield will stick templates will stick with glue stick later we will cut with a utility knife We will do this on a plate Cardboard 0.5 centimeters and so we have to be if you have cardboard 0.5 cm thick You may assert any other measure We continue with templates that make the back of the shield repeat the operation did to form the front cutting and gluing them with glue stick Stone will separate cardboard with a cutter and so we have to give both finished parts then we will turn to one of them School and apply glue or white glue the two pieces will stick to form a that will that will help us assemble the remaining pieces and so we get the two pieces together then mount parts we need to finish complete our shield for for this will place the base of the shield another sheet of cardboard and mark its outline with pencil this will serve as a guide to form the rings riding the shield We will cut the corresponding templates to decoration which form the metal ring once we have the will stick following the contour that we set before like the above parts the’ll stick with glue stick and will cut with a utility knife We follow to complete a second piece then the corresponding templates will cut the central ring and decoration We will stick on the carton and will cut and with this we have the part on which mount the media sphere we will get half using a plastic ball this the decorate with gold paper now we mount the parts as shown in the video the’ll stick with hot glue We continue to ring back once we have we will put the tapes which will allow our arm be subject shield for this we can use elastic bands or as in this case a belts we have drawn from an old backpack they no longer use now putting our arm will measure the piece we need belt and cut the same length 2 once the have the will stick to the back of the shields Hot silicone once stuck his arm will put to test the subject is correct and with this we have almost finished and we can only stick the semi sphere in the center shield shield to finish decorating the shield We must cover the areas that have been with carton sight such as the edges of this We will do this by cutting strips of paper the same width as the part to cover for this we use templates with texture iron if necessary match the cardboard surface with sandpaper then the strips will stick with glue stick bar and so is our shield us with all parties covered if you liked the video do not forget to leave your LIKE and share it with your friends in your social networks and recalls that it can send your cards or whatever you want to the address we have said the beginning of the video I hope you enjoyed and see you in the next

100 thoughts on “ESCUDO de LINK – The LEGEND of ZELDA | Te Digo Cómo”

  1. Súper cool max 😜😜😜XD POR FAVOR HAGAN UN ESCUDO CASCO ESPADA Y ARMADURA ROMANA POR FAVOR O SOLO EL ESCUDO Y CASCO LIKE PARA QUE EL DESEO DE MUCHOS SE CUMPLA UN ABRAZO SOLIDARIO Y TODOS LOS RESPETOS EN NOMBRE DE MIS COMPATRIOTAS COLOMBIANOS HACIA USTEDES TDCSH TE DIGO COMO SE HACE

  2. En el minuto 2:34 dice que si ves esto que lo compartas y que le des like . Tambien pregunta que manualidad de video juegos quieren en el futuro . Denada

  3. tengo un problema con las plantillas desde la pagina web .Me salen las plantillas en color morado

  4. Ya se que es fuera de tema con esto pero quiero que hagan un video haciendo algo de one piece, no se tal vez un log post o el sombrero de paja de Luffy , o el sombrero de Chopper,etc.

  5. La plantas de Mario bros a tamaño real, suena exagerado y lo es, por eso digo que por lo menos sea de 1 metro.

Leave a Reply

Your email address will not be published. Required fields are marked *