How to use your Dental Monitoring ScanBox with aligners treatment – English

How to use your Dental Monitoring ScanBox with aligners treatment – English

Articles Blog


Stand in front of a mirror.
Open your dental monitoring application. The application is intuitive and will guide
you. Press the take Scan button and follow the instructions.
Remove your aligners. Unmute your phone. Place your phone into the ScanBox and
latch it in. Insert the Cheek Retractor and snap the scan box into place.
Position the arch downwards insert one side first then the other. You will hear
a click when your ScanBox is properly attached to your retractor during the
scan audio instructions will guide you through the steps. Let’s go! Double tap on
the screen to start the scan for this step, bite down on your back teeth and
keep your teeth together. Start moving your head as soon as you hear the camera
make a sound. Shift the scan box to one side. Now shift the ScanBox to the other
side. Make sure you move the ScanBox at the same rate as the progress bar. Scan
all the way to the side to make sure your back teeth are well seen. You can
also turn your head slightly in the opposite direction if that is easier.
Back to the center if you need to restart the current step simply press
the restart button. For this next step you’ll have to keep your teeth slightly
apart and scan side to side open your mouth just enough for your
tongue to fit in between your teeth. For this next step, insert your aligners open your mouth slightly and keep your
teeth apart. To remove the ScanBox, hold the retractor in place with your thumbs
and pull the box forward, then remove the retractor. That’s it! Now it’s your turn
to try out your first scan!

Leave a Reply

Your email address will not be published. Required fields are marked *